NAM4
Full View NAM 4 - 16 (Example of a customized version)

eubus NAM 4 – Network Attenuator Module

Product Description

The NAM 4 has between 4 and max. 36 high-precision attenuators and 4 up to max. 36 inputs and outputs that permit complex radio hop simulation such as it is required for handover test scenarios, for example. The system can be linked up and controlled via Ethernet and thus easily integrated in a network. This means a NAM 4 system can be controlled remotely from any widely available terminal program, from any standard web browser or the eubus Controller Software. Our open interface protocol can be used to implement the NAM 4 in existing systems.

However, the NAM 4 can also be operated manually whenever necessary. The included “NAM Controller” software can be used to create professional long-term tests that run automatically for a specified period for the purpose of load simulations in the field of mobile communications.
In addition, multiple tests can run in parallel time-independently. High-precision attenuation is possible in 0,5dB (0,38-3GHz) or 1 dB (0,7-6GHz) increments in the range of milliseconds. All time settings, test lengths and attenuation value settings are adjustable. The attenuation values appear on the device's display and can be queried at any time using the operating software. All tests can be carried out and controlled remotely.

For each channel an attenuation offset value can be set.

Features

  • Designed for easy to use radio hop simulation and handover test scenarios
  • High-precision attenuation in 0,5dB or 1dB increments
  • 4 to max. 36 high-precision attenuators
  • 4 to max. 36 inputs and output
  • Extremely fast – works in the millisecond range
  • Attenuation and offset can be controlled remotely by means of terminal programs or web browser
  • Firmware update function implemented (over Ethernet)
  • Infinitely adjustable attenuation value settings
  • Delivered with intelligent software
  • Suitable for any laboratory or field application
  • Very flexible and adaptable system for most applications
  • Compact, stable housing
  • A low cost “MANUAL Attenuator Module”, MAM 4, without Software and Ethernet connection is also available

The NAM 4 system was designed to simulate the conditions of a radio hop in all current and future radio networks including GSM, DCS, UMTS, WLAN, WiMAX, Bluetooth and UMTS LTE, for example. The system offers 4 to max. 36 inputs and outputs, works in the millisecond range, and can be used either in the laboratory or as a mobile unit in field applications.

Download: Product data (pdf)

Technical Data of NAM

Type:NAM4
Frequency range:380MHz - 3GHz or 700MHz – 6GHz
Attenuation: up to 95,5dB in 0,5dB increments / up to 63,0dB in 1,0dB increments (6GHz)
Insertion Loss:< 6dB (1GHz), < 7,5dB (6GHz)
Impedance:50 Ohm
HR Connection:N female or SMA or customized (front or back side)
Input Power:Maximal 100mW average
Frequency Bands:GSM (450, 900, 1800 MHz), UMTS, WLAN, WiMAX, Bluetooth and UMTS LTE
Mode of operation:Remote control over Ethernet (control software optional)
Manual operation:Operation using rotary controls and LED displays
Power Supply:100V – 240V, 47Hz - 63Hz
Ambient Temperature:0 through + 50°C
Housing:19” aluminium with 1U to 6U, depending on required channels
Delivery Package:NAM4 system, NAM controller software and power cable
Warranty:12 months

Customer specific versions are available on request.

Ordering Information

  • NAM 4-4 (4 attenuators, 4 input & 4 outputs)
  • NAM 4-8 (8 attenuators, 8 input & 8 outputs)
  • NAM 4-12, -16, -20, -24, -28, -32, -36 accordingly

Back to RF Systems page